green concrete saw blade | |||||
| |||||
|
We have concrete saw information and concrete saws for sale right here. Find all the resources you need using our ttusted concrete saw guide and directory. We have discount concrete saws as well as cheap concrete saws for sale. Look hereThe increase of one horsepower over the GC160 and GCVl60, to 6.0 horsepower and 6.5 horsepower for the GC190 and GCV190 respectively, was achieved through an increase of displacement from 160 to 187 cc. This also results in a 0.5 lb.ft. torque increase for both engines, with the GC190 delivering 8.9 lb.ft., and the GCVI90 delivering 8.1 lb.ft.To maintain reliability with the higher output, internal components have been strengthened with a stronger piston pin, larger connecting rod, larger rod journal and redesigned oil control ring. Brad nailers shoot skinny nails called brads. Ranging from 3/8 in. to 2 in. long, brads are perfect for most door and window trim, baseboards and other moldings. Aside from speed, you get better-looking results with a brad nailer: no hammer dents in the wood, less splitting, smaller nail holes to fill, and moldings don''t get knocked out of position as you drive nails. For heavier trim (3/4-in. thick moldings, for example), rent a finish nailer, which shoots thicker nails up to 2-1/2 in. long.TIP About Northern ToolNorthern Tool & Equipment Company is a multi-channel supplier of high quality products to do-it-yourselfers and businesses including automotive shops, grounds maintenance professionals, contractors and others for over 22 years. With 43 stores in 10 states and a strong Web presence, Northern is the ultimate resource for generators, small engines, pressure washers, hand, air and power tools, hydraulics, pumps, trailer parts, seasonal equipment, automotive supplies, NorTrac tractors, and much more. Visit the company on the Web at www.northerntool.com. Though light in weight, Airbor magnetic drill has a powerful 1.6-hp air motor and 1,600-lb magnetic holding strength. With its extra rack, stroke length is extended to 10 1/4 in. Annular cutter capacity is up to 2 1/16 in. diam. Geared chuck adapter converts the unit to a standard drill press. The Slugger Air Force pneumatic drill, at 24 lbs, 6 1/4" high, is useful for confined area drilling. The drill''s features include a permanent magnet that turns on or off by air power, a cutter capacity of up to 1 1/16" diameter x 3/4" depth and the ability to use ShortSlugger cutters and frame cutters. These cutters'' geometry allows the operator to drill multi-layered truck frames in a single pass. ©2003 www.concrete-saw.net. All rights reserved. |