concretetracksaws

The popularity of cowboy shooting means lots of people are working on Colt and Ruger single-action revolvers. Both of which have the easiest screws in creation to mess up. Brownells has assembled a kit that contains the very specific drivers needed for those pesky screws. For the Ruger set there are four bits and the Colt set has five, The Magna-Tip handle for them is hollowed out so the bits can be stored inside so there''s no risk of getting them mixed up with other stuff. The only fault I find is once you take them out of the package you have to count bits or study screws to separate the Colt from the Ruger. I''ll probably take a vibrating marker and fix that.

The effort is transferred to the jaws by two levers which act by a cam system on the links that control the automatic clamping of the jaws on the wire rope. The Hand-i-Lift was developed by a technician with 35-plus years of experience in the small engine and lawnmower repair business. It''s available in 2 models: 4-3-6 for a wheel-base of 48 inches wide by 60 inches long, and 5-3-7 for a 60-by-84 wheel-base. The standard lift height is 36 inches, but can be custom built to 44 inches high; the load limit is 1,500 pounds. Both models have removable panels to allow full access to the service area. The table will go from the floor to full height in 60 seconds or can be stopped in between and supported on the safety chain. Constructed of all-welded steel, the Hand-i-Lift comes with a limited lifetime warranty against defects in materials or workmanship. The winch, cables and pulleys are backed by a limited 2-year warranty. The basic units with a wood deck cost $650 for the 43-6 and $740 for the 5-3-7. Delivery and installation are free within 200 miles of Holliday, Texas. Powered Tarping Systems provide a safe way to tarp loads without having to climb on the back of trailers or on top of loads. The operator simply connects a tarp to the spreader bar and guides the tarp along the length of the trailer via a hand-held pendant control and powered winch system. The systems can be customized to fit a specific application and are available in a variety of materials. Optional platform and stairs are available for safe access to the side of trailers. Carbis Inc., Florence, S.C. A well-intentioned but hopelessly naive friend once told me that if Linda rubbed a little Goop or other good hand cleaner on the spots on my overalls, they''d come out much more easily in the wash.

A diesel-powered, high-pressure air compressor is rated at 1,100 cfm and has a pressure range from 150 to 350 psi. The self-contained, 100% oil-free compressor has a "save all" base that eliminates fuel spills and oil leaks, making it one of the most environmentally friendly high-pressure units available. The diesel-driven engine stays well within the boundaries of the EPA and CARB emissions regulations. A complete line of accessories for the compressor is also available, ranging from aftercoolers to --40[degrees]F desiccant dryers and filters. Air compressor manufacturer, P.K. Lindsay, Deerfield, N.H., has been sold to American Eagle Accessories Group, Garner, la., a division of Stellar Industries Inc. The Lindsay air compressors are sold under the Lindsay and E.L. Smith brand names. All Lindsay compressor assets have been moved to American Eagle''s Garner plant and resumed full production. American Eagle is also a distributor of various truck-related accessories. According to the company, the FRL series of compressed air filters, regulators, lubricators, and manual control valves provides efficient moisture and contaminant removal, accurate pressure regulation, and precision lubrication for all air-operated equipment applications. All of the components in the series are available individually or in combination units. According to the company, its compressed-air productivity tools cut energy costs by as much as 70%, while reducing the compressor burden and shop noise levels. A 24-pg application manual shows bow these accessories provide solutions to spot chilling (to -40[degrees]F), dry machining, blow-off, control cooling, air conveying, static, liquid transfer, and spill pick-up. The products meet OSHA noise and dead-end pressure requirements. Welding shops require many types of equipment, including power supplies, guns, torches, wire feeders, flux-handling devices, and accessories such as cables and ground clamps, as well as consumables-filler metals, fluxes, and shielding gases. For brazing, shops employ furnaces and custom-built fixtures.

©2003 www.concrete-saw.net. All rights reserved.